Steam Sterilizer with automatic sliding door and touchscreen control unit
Chamber volume (StE) | : 1 |
Model | : Double door |
Door system | : Sliding door |
Chamber volume (lt) | : 250 |
Specifications:
GENERAL SPECIFICATIONS:
• Material: Vessel, Jacket, Generator
• Exterior body : AISI 304
• 4 polyamid vehicle for easy transporting
STANDARD PROGRAMS:
• 121 ºC Rubber
• 125 ºC Rubber
• 134 ºC Instrument
• 134 ºC Textile
• Bowie-Dick Test
• Leakage test
• Optional programs
CONTROL UNIT:
• 7" colour touchscreen display
• Full automatic with microprocessor
• Second microprocessor control system (generator pressure, water level, jacket pressure, air pressure ext.)
• MemoTrans validation system (optional)
GENERATOR:
Generator information for each product are shown in the "Product Specifications" document.
DOOR SYSTEM:
• Automatic sliding door
• Manual system for urgent cases
• Automatic open-close for sliding door systems
• Door safety locking
• Door closing safety
ALARMS:
• Visual, written and audible warning monitoring
• Pressure error (vacuum), steam error (temperature), electric failure (audible and visual warning), low water level, door alarm
• If heat is lower than 1 ºC from setting value, alarm is given and sterilization starts anew.
• During electric cut-off if parameters are appropriate sterilization continues from proper position, if requested, if stopes.
POWER SUPPLY:
• 220/380 VAC - 50 Hz (+)
PRINTER:
• Thermal technology (40 colon)
• Cartridge dot strike (optional)
• Written informations :
- Date and clock
- Sterilization no, name and counter
- Preheating time and number
- Prevacuum time and number
- Sterilization temperature and time
- Drying time, sterilization phases pressure and temperature values for moment instant.
- Error conditions and date, clock informations
- System barring stopping or cutting sterilization date, clock informations
- Date, clock and total time informations completing sterilization timeMONITORING PARAMETERS:
• Program name and number
• Sterilization phases
• Generator water level
• Vessel pressure and temperature, 2.sensors (optional)
• Jacket, generator and seal pressures (optional)
• Jacket and generator temperatures (optional)
• Total sterilization time and remaining time
• Sterilization pressure and temperature values
• Sterilization counter
• Real time and date
• Errors and error occasionsSTEAM INSTALLATION:
• Material : AISI 304, brass and copper (Cu)
• Pneumatic solonoid valves
• Pure steam system (CE)
• Calibrated manometers for vessel , jacket, generator and **seal
• 0.2 µm
